Model 115-3 Axes Benchtop Coil Winder

with 3 Axis Servo and MCS2 Control 

Click here for Model 115-1 Axis

*Similar machines may be in stock and available for sale, call our sales department for details.

MACHINE

Model 115-3

Wire size:

 50 to 16 AWG based on spindle pulley ratio

Maximum coil diameter:

 3.75" (95mm) std. - 4.25” (108mm) opt.

Spindle height:

 8.00" (203mm)

Output shaft diameter:

 1/2" shaft with flat

Standard Spindle motor:

 3500 RPM, 1/2HP, 9 in/lb Brushless Servomotor  

Optional Spindle motor:

 1750 RPM, 1/2HP, 18 in/lb Brushless Servomotor  

Spindle drive:

 PWM Servo amplifier

Standard ratios (belt & pulley):

 4:1, 3:1, 2:1, 1:1, 1:2, 1:3, 1:4

Spindle speeds:

RPM Ratio Torque
  14000 4:1 2.25 lb/in, .187 lb/ft  
  3500 1:1 9 lb/in, .75 lb/ft  
  875 1:4 36 lb/in, 3 lb/ft
Spindle positioning:  .225 degree ~ 1600 Counts per Rev
Traverse drive:  20 oz/in, 7500 RPM brushless servomotor  
Pitch Resolution:  .000001" (.0001 mm)
X-Y-Z Axis Speed:  300 in/minute (127 mm/second)
X Axis Travel:  4" (101mm)
Y Axis Travel:  2.5" (63mm)
Z Axis Travel:  1.5" (38mm)
X-Y-Z Axis Position Resolution:  .001" (.01mm) inch mode only
Tailstock bearing inside diameter:  .393" (10 mm)
Tailstock travel:  3 1/4"
Maximum distance between centers:  6" (152mm) extra distance optional

Power requirements:

 120 VAC  1 Ph  50/60 Hz  720 VA  
Spindle Brake:  DC Electromagnetic (Programmable)
Tailstock:  Hand operated w/safety interlock
Guard System:  Hand operated w/safety interlock
Weight:  Approx. 80# (36 Kg)
Dimensions:  D-19" (482) W-16" (406) H-19" (482)
CONTROL
Model MCS2
Control Type:  Embedded - Freescale 32 bit Processors  
Display:  4 line x 40 Character Backlit LCD  
Input Keypad:  24 Key (1/2" Rubber Tactile Touch)  
Program Storage:  3500 lines / Complex and 10 Presets / Simple
I/O Points:  8 in / 8 out (24 VDC)  
Operation System:  Microsoft Windows  XP/ 7 GUI  
Programming Software:  MCSCOM Graphical User Interface  
Interface:  RS232 for PC Interface  
Network:  Optional USB  

OPTIONS

Foot Pedal Control:  Variable Speed w/On-Off Switch  
Wire Guide Assembly:  Eyelet, Pulley or Optional "Electro Guide"
Dereeler Ports:  1 to 4 for Hysteresis Brake w/Tension Switch  
Additional I/O Points:  8 in / 8 out (24 VDC)  
Wire Tensioning:  Friction or Programmable Hysteresis Brake  

   

Machine Control Specialists, Inc.
35 N Garden Avenue
Roselle, IL 60172-1742
Voice: 630-980-3200   Fax: 630-980-3249
Email: info@mcsinc.com